Flywheel self-learning
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Crankshaft and flywheel › Flywheel self-learning
‹ Prev Engine flywheelNext › Crank shaft - r + r with engine removed - check main and connecting rod bearingand replace if necessary
EngineFlywheel self-learning
Flywheel self-learning
Connect the diagnostic equipment (Examiner Plus or Smart) and carry out active diagnosis 'Zeroing phonic wheel initialisation'.
Bring the engine up to temperature (temperature greater than 80° Χ) from minimum level.
Accelerate to 5000 rpm (constant) for about 2-3 seconds and release. Carry out this operation for three consecutive times.
With the ignition off, wait 45 s before re-starting the engine (Power Latch function).
‹ Prev Engine flywheelNext › Crank shaft - r + r with engine removed - check main and connecting rod bearingand replace if necessary
Parts & tools for this job Staging For 2003 Fiat Panda
- PARTEngine gasket setSearch: Fiat Panda 2003 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.