CLUTCH PEDAL - R R FOR RHD VERSIONS

Operation 3330B27 · PEDAL UNIT

1.2 8v · Right hand drive

Removing

1. Working from inside the vehicle, remove clip (1a) and release clutch pedal return spring (1b).

2. Disconnect the master cylinder push rod from the clutch pedal.

3. Unscrew nut (3a), unscrew pedal retaining pin (3b) and withdraw to release the clutch pedal.

4. Remove the clutch pedal.

Refitting

Position the clutch pedal on the pedal unit.

Fit the pedal retaining pin and tighten the nut.

Fit the return spring on the pedal and lock by means of the retaining spring.

Connect the clutch master cylinder pushrod to the retaining device on the clutch pedal.