Tunnel trim - r r

Operation 7040L20 · Cabin floor covering

Removing

Disconnect the battery negative terminal.

Release the trim complete with current socket.

1. Disconnect the electrical connection.

2. Remove the trim complete with current socket.

Remove the bottle holder interior trim.

1. Open the nut access covers (1a) and (1b).

2. Undo the fixing nuts (2a), (2b) and (2c).

3. Remove the tunnel cover.

Refitting

Place the cover on the tunnel and tighten the fixing nuts.

Close the nut access covers.

Place the trims inside the bottle holder.

Connect the electrical connection.

Position the trim complete with currect socket and check that it is securely fitted.

Connect the battery negative terminal.