Alarm led not working
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Alarm › Alarm led not working
Fault diagnosisAlarm led not working
ALARM LED NOT WORKING
When the alarm is operated, the LED does not come on
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the diagnostic equipment (Examiner Plus or Smart) and check that there are no faults in the system | End of diagnosis | Faults present | Continue to Step 2 | |
| 2 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Using the diagnostic equipment, carry out the active diagnosis of the LED | Continue to Step 4 | LED does not come on | Continue to Step 3 | |
| 3 | WIRING CHECK | All OK | Problems met | Operation |
Check the continuity and insulation of the wiring between the Body Computer and the panel Check that the supply for the LED leaves the Body Computer and that the LED lights up See | Continue to Step 4 | The supply does not leave the Body Computer for the LED | Replace the Body Computer Op. | |
| The supply is sent correctly from the Body Computer but the LED does not come on | Replace the LED in the panel Op. | |||
| 4 | Continue as instructed by the tester | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo GT
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.