Engine coolant temperature sensor - r r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Diesel injection system › Engine coolant temperature sensor - r r
EngineEngine coolant temperature sensor - r r
ENGINE COOLANT TEMPERATURE SENSOR - R R
Removing
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
Proceed with removal
- 1016A10 sound-proofing cover - r + r
1. Disconnect the electrical connection from the engine coolant temperature sensor.
2. Undo and remove the engine coolant temperature sensor.
| Name | Connector | |
|---|---|---|
| 1 | Engine temperature sender unit | See K36 ENGINE TEMPERATURE SENDER UNIT ( CONNECTORS ) |
Refitting
Place the engine coolant temperature sensor back in its housing and tighten it to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| ENGINE COOLANT TEMPERATURE SENSOR. | M12 | (Thermostat side 20 24 |
Connect the electrical connection to the engine coolant temperature sensor.
Proceed with refitting
- 1016A10 sound-proofing cover - r + r
Connect the negative (-) battery terminal
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.