Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)23 · Fault diagnosis
23 · Diagnostics

Seat belts locked

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Seats › Seat belts locked
Fault diagnosisSeat belts locked

SEAT BELTS LOCKED

When the belt is fastened and with the vehicle parked, the belt locks easily and/or remains locked even when movements are not abrupt (e.g. picking up an object)

Test results
1CHECK REELALL OKPROBLEMS ENCOUNTEREDACTION
Check the reel is correctly fitted, ensuring that the reference pin is correctly positioned in its seat on the vehicle body.Move on to Step 2Incorrect installationLoosen the bolt and position the reference dowel correctly. Retighten the bolt to the recommended torque.
2CHECK FOR FOREIGN BODIESALL OKPROBLEMS ENCOUNTEREDACTION
Check there are no foreign bodies inside the system.Move on to Step 3Foreign bodies present.Remove the foreign bodies.
3CHECK BELTSALL OKPROBLEMS ENCOUNTEREDACTION
Check for interference, deformation or dings caused by accidents.Move on to Step 4Interference present that makes the belts slide more slowlyRemove the interference and replace the damaged parts if necessary.
Presence of deformation or dings on the front anchorage linkReplace the front link
Presence of deformation or dings on the rear anchorage link

Replace the rear link

Op. 7065B14 ANCHORAGE ROD FOR (ONE) REAR SEAT BELT LEFT OR RIGHT - R.R.

Presence of deformations or dings on the front reel/pretensioner

Replace the front belt

Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON REEL - R.R

Presence of deformations or dings on the rear reel

Replace the rear seat belt

Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R.

4CHECK PRETENSIONER OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that pretensioner has not be activated by an accident. In this case, the presence of white powder will be noticed on the spring case, the reel will be locked and/or the belt deteriorated.Move on to Step 5Pretensioner found to have activated.

Replace the belt

Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON REEL - R.R

5CHECK REEL RELEASE SYSTEMALL OKPROBLEMS ENCOUNTEREDACTION
Check reel release by rewinding the belt for a short section and then gently unwinding.Move on to Step 6Fault in the front reel release system

Replace the front belt

Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON REEL - R.R

Fault in the rear reel release system

Replace the rear seat belt

Op. 7065B10 REAR SEAT BELT (ONE), LEFT OR RIGHT - R.R.

6CHECK CORRECT COMPONENT INSTALLATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check right/left component correspondence in relation to the side of the vehicle.End of diagnosisIncorrect installationRestore correct installation and replace the parts if necessary

Parts & tools for this job Staging For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.