ENGINE OIL COOLING RADIATOR - R + R

Operation 1084C34 · ENGINE OIL COOLING CIRCUIT

2.4 JTD 20v

Removing

- Position the vehicle on a lift.

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

Op. 7210E10 R.R. FRONT BUMPER

1. Undo the bolt (1a) and remove the cold air intake for the air filter (1b) after having released it from the air filter.

2. Undo the bolts (2a) and remove the radiator air duct (2b).

Op. 5540B70 LEFT FRONT LIGHT CLUSTER WITH DIRECTION INDICATOR - R.R.

Op. 5540B71 RIGHT FRONT LIGHT CLUSTER WITH DIRECTION INDICATOR - R.R.

Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER

1. Undo the bolts (1a) and disconnect the engine oil inlet and outlet pipes (1b), engine oil cooling radiator side.

Collect the engine oil that comes out in a suitable container.

1. Undo the bolts (1a) and remove the engine cooling radiator (1b).

Refitting

- Fit the engine oil cooling radiator in place and secure it using the bolts.

- Connect the engine oil inlet and outlet pipes, engine cooling radiator side and tighten the bolts.

Op. 7210A15 R.R. FRONT WING/HEADLAMP HOUSING CROSSMEMBER

Op. 5540B71 RIGHT FRONT LIGHT CLUSTER WITH DIRECTION INDICATOR - R.R.

Op. 5540B70 LEFT FRONT LIGHT CLUSTER WITH DIRECTION INDICATOR - R.R.

- Fit the radiator air duct in its housing and secure it using the bolts.

- Place the cold air intake for the air filter back in its housing and secure it using the bolts.

Op. 7210E10 R.R. FRONT BUMPER

Op. 0010T10 CHANGE ENGINE OIL

Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.

- Remove the vehicle from the lift.