Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)08 · Engine
08 · Engine

Engine coolant temperature sensor - r.r.

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Diesel injection system › Engine coolant temperature sensor - r.r.
EngineEngine coolant temperature sensor - r.r.

ENGINE COOLANT TEMPERATURE SENSOR - R.R.

Operation 1060G14 · DIESEL INJECTION PRESSURE PUMP ELECTRONIC CONTROL

2.4 JTD 20v

Removing

Op. 5530B10 BATTERY - R+R

Op. 1016A10 SOUND-PROOFING COVER - R.R

1. Disconnect the electrical connection from the engine coolant temperature sensor.

DescriptionConnector
1Engine coolant temperature sensor/sender unitSee K036 ENGINE COOLANT TEMPERATURE SENSOR/SENDER UNIT

2. Undo the engine coolant temperature sensor and remove it.

ENGINE COOLANT TEMPERATURE SENSOR - R.R.

Refitting

1. Place the engine coolant temperature sensor in its housing and tighten it to the recommended torque.

2. Connect the electrical connection to the engine coolant temperature sensor.

ENGINE COOLANT TEMPERATURE SENSOR - R.R.

Op. 1016A10 SOUND-PROOFING COVER - R.R

Op. 5530B10 BATTERY - R+R

Parts & tools for this job Staging For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.