Cam angle sensor - r.r
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Diesel injection system › Cam angle sensor - r.r
EngineCam angle sensor - r.r
CAM ANGLE SENSOR - R.R
Removing
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Disconnect the electrical connection from the cam angle sensor.
| Description | Connector | |
|---|---|---|
| 1 | Timing sensor | See K047 TIMING SENSOR |
2. Undo the bolts (2a) and remove the cam angle sensor (2b).
Refitting
1. Position the cam angle sensor (1a) in its housing and secure it tightening the bolt (1b) to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Cam angle sensor | Bolt | M6 | 0.8 ÷ 1.0 | 2.4 JTD 20V |
2. Connect the electrical connection to the cam angle sensor.
Op. 1016A10 SOUND-PROOFING COVER - R.R
- Connect the negative battery terminal.
Parts & tools for this job Staging For 2005 Alfa Romeo Brera
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.