Workshop Manuals Factory service & repair Alfa Romeo
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)08 · Engine
08 · Engine

Single tappet cover -r.r and replace gasket

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Cylinder head/s › Single tappet cover -r.r and replace gasket
EngineSingle tappet cover -r.r and replace gasket

SINGLE TAPPET COVER -R.R AND REPLACE GASKET

Operation 1016A20 · TAPPET COVERS

2.2 JTS

Removing

- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

DescriptionConnector
BatterySee A001 BATTERY

1. Disconnect the electrical connection from the ignition coil module.

DescriptionConnector
1Ignition coilSee A030 IGNITION COIL
SINGLE TAPPET COVER -R.R AND REPLACE GASKET

1. Disconnect the electrical connections (1a) and (1b) from the phase transformer electromagnets.

DescriptionConnector
1aExhaust side phase transformer solenoid valveSee N093 PHASE SHIFTER SOLENOID VALVE ON EXHAUST SIDE
DescriptionConnector
1bInlet side phase transformer solenoid valveSee N092 PHASE SHIFTER SOLENOID VALVE ON INTAKE SIDE
SINGLE TAPPET COVER -R.R AND REPLACE GASKET

1. Undo the bolts (1a) and remove the ignition coil module (1b).

SINGLE TAPPET COVER -R.R AND REPLACE GASKET

1. Loosen the band and disconnect the engine oil vapour recovery pipe from the tappet cover.

2. Undo the bolts (2a) and remove the tappet cover (2b) complete with gasket and phase transformer electromagnets.

SINGLE TAPPET COVER -R.R AND REPLACE GASKET

Refitting

1. Place the tappet cover (1a), complete with gasket and phase transformer electromagnets, back in its housing and secure it tightening the bolts (1b) to the recommended torque.

ComponentFasteningdiaValue (daNm)Validity
Tappet coverBoltM6(cylinder head side) 0.7 - 0.9

1.9 JTS

2.2 JTS

2. Connect the engine oil vapour recovery pipe to the tappet cover and tighten the band.

SINGLE TAPPET COVER -R.R AND REPLACE GASKET

1. Place the ignition coil module (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

ComponentFasteningdiaValue (daNm)Validity
Ignition coil moduleBoltM6(tappet cover side) 2.2

1.9 JTS

2.2 JTS

SINGLE TAPPET COVER -R.R AND REPLACE GASKET

- Connect the electrical connections to the phase transformer electromagnets.

- Connect the electrical connection to the ignition coil module.

- Connect the negative battery terminal.

Parts & tools for this job Staging For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.