BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE

Operation 3330C30 · BRAKE PUMP, RESERVOIR AND LOAD PROPORTIONING VALVE

Removing

- Drain the brake-clutch fluid into a suitable container.

- Unscrew the engine coolant reservoir fixing bolts and move it aside.

1. Press the clips and remove the minimum brake-clutch fluid level warning light switch.

2. Disconnect the clutch system supply pipe.

3. Undo the bolt (3a) and remove the brake fluid reservoir (3b) from the brake pump.

Refitting

- Place the brake-clutch fluid reservoir in its housing and secure it using the bolt.

- Connect the clutch system supply pipe.

- Place the minimum brake-clutch fluid level warning light switch in its housing.

- Fit the engine cooling reservoir in place and secure it using the bolts.

Op. 0010T64 BRAKE AND/OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY

Op. 0010T65 HYDRAULIC BRAKE SYSTEM - BLEED AIR