RAIN GUTTER MOULDING ON ROOF - R.R.

Operation 7055A12 · EXTERIOR MOULDINGS

Removing

Op. 7005A34 FRONT SIDE DOOR COMPARTMENT SEAL - R.R

1. Use a drill to remove rivets (1a) securing moulding (1b) in the door area.

2. Detach moulding (1b) from the fixed glass area (2a), detaching its adhesive surface from the glass perimeter seal.

Refitting

- Check that the moulding is not damaged.

1. Clean and degrease the seal around the fixed glass to which the moulding is to be bonded.

2. Position the moulding.

3. Apply the rivets.

4. Bond the moulding adhesive surface to the glass perimeter seal.

Op. 7005A34 FRONT SIDE DOOR COMPARTMENT SEAL - R.R