AIR CONDITIONER CONTROLS

Operation 7040A17 · PASSENGER COMPARTMENT TRIMS

Removing

- Remove all the centre vents.

Op. 5010C34 AIR OUTLET ON CONSOLE - R+R

Remove the radio or, alternatively, the navigator.

Op. 5570T80 CAR RADIO EQUIPMENT - R+R

1. Release the retaining button for the gear lever boot.

2. Lift up the trim (2a) slightly releasing the internal retainers (2b).

1. Undo the trim fixing bolts.

2. Move the trim slightly.

1. Disconnect the electrical connection.

2. Disconnect the electrical connection.

3. Disconnect the electrical connection.

4. Keep the trim assembly.

If necessary:

Op. 5040D18 AIR CONDITIONING CONTROL UNIT - R.R.

Op. 5570T10 CAR RADIO SUPPORT - R+R - INCLUDES CONTACT REPAIR AND SUPPLY CIRCUIT CHECK

Op. 5520G30 START/STOP SWITCH FOR EASY-GO SYSTEM STARTER MOTOR - R.R.

Op. 5505A31 ELECTRONIC KEY ACKNOWLEDGEMENT DEVICE - R. R.

Refitting

Check that the trim is not damaged.

If removed:

Op. 5040D18 AIR CONDITIONING CONTROL UNIT - R.R.

Op. 5570T10 CAR RADIO SUPPORT - R+R - INCLUDES CONTACT REPAIR AND SUPPLY CIRCUIT CHECK

Op. 5520G30 START/STOP SWITCH FOR EASY-GO SYSTEM STARTER MOTOR - R.R.

Op. 5505A31 ELECTRONIC KEY ACKNOWLEDGEMENT DEVICE - R. R.

- Connect the electrical connections.

- Position the trim assembly and tighten the bolts.

- Position the gear lever surrounding trim and attach the retainers.

- Fit the boot retaining button.

Op. 5570T80 CAR RADIO EQUIPMENT - R+R

Op. 5010C34 AIR OUTLET ON CONSOLE - R+R