A05 Alarm led not working
- Make
- Alfa Romeo
- Model
- 147 Factory Service Manual
- Year
- 2000–2002
- Section
- Alarm › A05 Alarm led not working
Fault diagnosisA05 Alarm led not working
A05 Alarm led not working
When the alarm is operated, the LED does not come on
| Step | Test procedure | Result | Action |
|---|---|---|---|
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT Connect the diagnostic equipment (Examiner) and check whether there are any faults in the system | OK | |
| Not OK | End of diagnosis | ||
| 2 | ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT Using the diagnostic equipment, carry out the active diagnosis of the LED | OK | |
| LED does not come on | |||
| 3 | WIRING CHECK Check the continuity and insulation of the wiring between the Body Computer and the panel Check that the supply reaches the LED from the Body Computer: wiring diagram Wiring diagram E7015 ALARMS | OK | |
| The supply does not leave the Body Computer for the LED |
End of diagnosis | ||
| The supply is sent correctly from the Body Computer but the LED does not come on |
End of diagnosis | ||
| 4 | CORRECT OPERATION CHECK Check that the fault is no longer present | OK | Incorrect selection of diagnostic procedure |
| Fault persists | Incorrect selection of diagnostic procedure |
Parts & tools for this job Staging For 2000 Alfa Romeo 147
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo 147
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.