DISPLAYS FOR SELESPEED (HIGH LINE ONLY)

The NQS receives information on the gear engaged from the NCR (robotized gearbox connector) and displays it in the DOT matrix in the following format:

• Gear no.: 1,2,3,4,5,R,N this information is supplied by the gaer engaged signal coming from the NCR
• 'City' selection this information is supplied by the gear change mode signal

If this message is not available or if the gearbox is not the SELESPEED type, the NQS does not display the gear engaged.

The gear engaged is also displayed at the key off as long as the matrix remains lit up (see paragraph on the matrix)

In addition, the number showing the gear engaged flashes when the NCR determines that the gear selected by the driver is not correct for the speed of the vehicle at a frequency of +/- 0.5 Hz with DC 50%.

If the SELESPEED is faulty, the NQS receives this information and display it through the special symbol flashing in the DOT matrix, the flashing frequency is +/- 0.5 Hz with DC 50%.

When the message is received (horn request) the NQS activates the horn with the Beep alarm 3 warning sound.