RADIO ANTENNA AMPLIFIER
- Make
- Land Rover
- Model
- Range Rover Classic
- Section
- REPAIR › RADIO ANTENNA AMPLIFIER
86
ELECTRICAL
34
REPAIR
ECU - MEMORY SEAT
Remove
1. Remove driver’s seat.
See CHASSIS AND
BODY, Repair, Front Seat Electrical
2. Disconnect connector from seat.
3. Remove cable ties.
4. Disconnect sensor and seat switch multiplug,
remove from seat.
5. Disconnect seat motor multiplug.
6. Turn ECU retaining turnbuckle half a turn.
7. Remove ECU.
Refit
8. Reverse removal procedure. Ensuring cable
retaining clips are correctly located.
See
Memory Seat - Harness Layout
9. Initialise system.
RADIO ANTENNA AMPLIFIER
Service repair no - 86.50.29
Remove
1. Disconnect battery negative lead.
2. Lower or remove headlining.
See CHASSIS
AND BODY, Repair, Headlining
3. Remove electrical leads and radio antenna lead.
4. Remove two screws, remove amplifier unit.
Refit
5. Reverse removal procedure.
Parts & tools for this job Staging For Land Rover Range Rover
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.