Brake system (Brake fluid): Technical data

Make

Audi

Model

A5

Section

Brake system › Technical data › Brake fluid

Running gearBrake fluid

General notes Brake fluid is hygroscopic, i.e. it has the tendency to absorb water and moisture from the atmosphere.

The boiling point decreases as the water content increases, which means a considerable rise in brake fluid temperature can lead to formation of vapour bubbles and brake failure. The colour of the brake fluid becomes darker over the course of time. A dark brake fluid colour is not an indication of its condition. The change in colour is caused by chemical reactions.   WARNING Rubber parts of brake system (sleeves, seals) are not compatible with mineral oil, fuel and cleaning agents. Even minute quantities coming into contact with a seal or sleeve will affect the component and could impair brake operation. The consequences of a contaminated brake system only become apparent months later, and then give rise to greater expenses, particularly in vehicles equipped with ABS.

A = Sleeve (original size) B = Sleeve (swollen due to contact with mineral oil) Summary of the above mentioned points: Always keep brake fluid containers properly sealed. This is the only way of preventing contamination by oil, dirt, cleaning agents or moisture. Brake fluid containers should be kept completely separate from oils (including hydraulic fluid) and cleaning agents to prevent any mixture of fluids or even filling of the brake system with an incorrect fluid. We recommend using brake fluid approved by Audi → ETKA.

01 Steering & suspension