Workshop Manuals Factory service & repair Alfa Romeo
01 General data and specifications02 Engine (Twin Spark, JTD and V6)03 Clutch04 Gearbox (manual, Selespeed and Q-System)05 Front axle06 Brakes, ABS and traction control07 Steering08 Suspension and wheels09 Heating, air conditioning and washers10 Electrical equipment11 Body12 Body panels and reinforcement13 Wiring diagrams14 Connectors and pin-outs15 Wiring harnesses16 Fault diagnosis17 Special tools
Alfa Romeo 156 Factory Service Manual (1997-2002)16 · Fault diagnosis
16 · Diagnostics

A05 Alarm led not working

Make
Alfa Romeo
Model
156 Factory Service Manual
Year
1997–2002
Section
Alarm › A05 Alarm led not working
Fault diagnosisA05 Alarm led not working

A05 Alarm led not working

When the alarm is operated, the LED does not flash

StepTest procedureResultAction
1CHECK WITH DIAGNOSTIC EQUIPMENT

Connect the diagnostic equipment (Examiner or other instruments) to the diagnostic socket

Check, in order:

  • no faults in the alarm control unit
  • no faults in the alarm receiver
OK

Move onto step 2

Error detected in the control unit or receiver
  • Continue according to the instructions for the diagnostic equipment

End of diagnosis

Dialogue failure for diagnostic equipment between the control unit and the receiver

End of diagnosis

2ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT

With the diagnostic equipment (Examiner or other instruments) carry out the active diagnosis of the operation of the LED.

OK

Move onto step 3

LED not activated

Restore:

End of diagnosis

LED not activated

End of diagnosis

3CHECK CORRECT OPERATION

Check that the fault is no longer present.

OK

End of diagnosis

Fault persists

Incorrect selection of diagnostic procedure

Parts & tools for this job Staging For 1997 Alfa Romeo 156

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.