Front brakes Fig. I
- Make
- Peugeot
- Model
- J5 Factory Workshop Manual
- Year
- 1982–1994
- Section
- Identification - data › Front brakes Fig. I
BrakesFront brakes Fig. I · page 1 of 3
Front brakes Fig. I
| 1000 → 1500 | 1800-TURBO | |
|---|---|---|
| Caliper type | GIRLING | |
| Diameter of pistons, upper | 38 mm | 42.8 mm |
| Diameter of pistons, lower | 48 mm | 48 mm |
| Brake pads made by / type | TEXTAR T252 (→ 1/85) ; ENERGIT 394 (1/85 →) | ENERGIT 394 |
| Total braking area | 194.8 cm² | 269.6 cm² |
| Min. thickness of pads | 2 mm | |
| Wear warning sensor on inner brake pad | ||
| Diameter of disc | 255 mm | 290 mm |
| Thickness of disc | 13 mm (→ 4/84) ; 16 mm (4/84 →) | 16 mm |
| Min. thickness of disc | 11.8 mm (→ 4/84) ; 13.5 mm (4/84 →) | 14.8 mm |
| Max. disc run-out | 0.15 mm | |
| Point at which run-out is measured | approx. 2 mm from the outside diameter | |
Rear brakes Fig. II
| 1000 → 1500 - TURBO | 1800 | |
|---|---|---|
| Type | GIRLING | |
| Diameter of wheel cylinder | 22.2 mm (→ 2/83) ; 25.4 mm (2/83 →) | 27 mm |
| Brake linings : make | FERODO | |
| Type | AM 14 FF | IL 339 |
| Total braking area | 537 cm² | 554 cm² |
| Min. thickness of linings | 1 mm | |
| Diameter of drum | 254 mm | |
| Max. diameter after reworking | 254.8 mm | |
| Max. diameter due to wear | 255.6 mm | |
Parts & tools for this job Staging For 1982 Peugeot J5
- PARTBrake padsSearch: Peugeot J5 1982 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.